Toshiba Tecra M2-S410 Maintenance Manual - Page 251
Installing the Cover/Touch Pad, Cover/Touch pad, Replacement Procedures
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
4.11 Cover/Touch pad 4 Replacement Procedures Installing the Cover/Touch Pad To install the cover/touch pad, follow the steps below and refer to figures 4-18 to 4-23. 1. Connect the touch pad cable to the connector on the touch pad. 2. Install the touch pad and touch pad switch on the cover while hooking the latches. 3. Turn the cover face down and secure the touch pad and touch pad switch to the cover with the following screws. • M2.5×4B FLAT HEAD screw ×2 4. Place the cover on the display assembly and secure the latches by pressing it. Secure the cover with the following screw. • M2.5×4B FLAT HEAD screw ×1 • M2.5×12B FLAT HEAD screw ×1 5. Connect the touch pad cable to the connector PJ3201 on the system board. 6. Close the display panel and turn the computer face down. Secure the cover with the following screws to the display assembly. • M2.5×4B FLAT HEAD screw • M2.5×6B FLAT HEAD screw • M2.5×16B FLAT HEAD screw • M2×4Z BIND screw or • M2×4 Stick screw ×1 ("4B" in the figure below) ×7 ("6" in the figure below) ×1 ("16" in the figure below) ×1 ("4" in the figure below) ×1 ("4" in the figure below) TECRA M2 Maintenance Manual (960-468) 4-37