Toshiba Tecra M2-S410 Maintenance Manual - Page 44
Power Supply, Hardware Overview
View all Toshiba Tecra M2-S410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
1 Hardware Overview 1.11 Power Supply 1.11 Power Supply The power supply supplies many different voltages to the system board and performs the following functions: 1. Checks power input to determine: • Whether the AC adaptor is connected to the computer. • Whether the battery pack is installed and supplying power. 2. Checks power supply's internal controls: • Battery pack charging: start, stop and voltage supplied to the battery pack • Power supply system: Power supplied from a DC power source (AC adaptor) • Faulty power supply: Executes forced shutdown if needed • Logic: Power supply to various circuits • Charging current to PWM control IC for battery pack charging 3. Controls the following aspects of the logic system • Power supply to gate arrays • Power on/off 4. Indicates the following: • DC IN (sets LED to orange or green) • Battery icon (sets LED to orange or green) • Faulty power supply by low battery 5. Interface for the following: • BIOS via EC/KBC • Function mode of power supply 6. Detects the following: • Input voltage to logic system • Input voltage, overvoltage and input/output to battery pack • Battery pack's internal temperature • Input voltage to DC power supply (output from AC adaptor) The power supply output rating is specified in Table 1-9. 1-30 TECRA M2 Maintenance Manual (960-468)