Toshiba Tecra M5 Maintenance Manual - Page 114
SD Card Slot Troubleshooting
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
2 Troubleshooting Procedures 2.15 SD Card Slot Troubleshooting 2.15 SD Card Slot Troubleshooting This section describes how to determine if the computer's SD card functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Check on Windows XP Procedure 2: Connector Check and Replacement Check Procedure 1 Check on Windows XP Insert an SD card into the slot. Check if the installed Windows recognizes automatically the SD card and the data in the SD card can be read. If the card is not recognized or data are not red, go to Procedure 2. Procedure 2 Connector Check and Replacement Check The SD card is connected to IS2101 on the System Board. Check 1 The SD card and the System Board may be disconnected. Make sure the SD card is firmly inserted to IS2101 on the System Board. If not, insert it firmly. If the SD card is still not functioning properly, perform Check 2. Check 2 The SD card may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. If the problem continues, perform Check 3. Check 3 The System Board may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. 2-60 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/114.png)