Toshiba Tecra M5 Maintenance Manual - Page 197
Bluetooth test, Enter
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics 3.27.3 Bluetooth test To execute this test, press 3 and press Enter. NOTE: Use another computer that can communicate by the Bluetooth as a reference machine to perform this test. Insert a floppy disk containing the test program into the target machine and turn on the target machine. The following Bluetooth test menu will appear. #### Bluetooth sub system test program VX.XX #### * * * 1....BD_ADDR check * * * * 3... Communications test (DUT mode) * * * * T....communications test (TEST mode) * * * ....Press test number [1, 3, T] ? _ Press 1 or 3 key to perform the corresponding subtest. To quit the Bluetooth test program, eject the floppy disk and turn the computer off while the menu above is displayed. Subtest 01 BD_ADDR check This subtest checks the BD_ADDR functions. When the Bluetooth test menu is displayed, press 1 to select the test and press Enter. The following message will appear: Bluetooth Subsystem T&D for PCSE(BD_ADDR) VerX.XX Copyright (C) by TOSHIBA Co Initializing ... When the machine has passed the test, it displays BD_ADDR. If BD_ADDR has no problem, the following message is displayed. TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 3-67
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/197.png)