Toshiba Tecra M5 Maintenance Manual - Page 275
Internal microphone
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
4.13 Internal microphone 4 Replacement Procedures 4.13 Internal microphone Removing the Internal microphone To remove the internal microphone, follow the steps below and refer to Figure 4-24. 1. Peel off the glass tape and disconnect the microphone cable from the connector CN6050 on the sound board. 2. Remove the internal microphone with a microphone holder from the slot. 3. Separate the internal microphone and the microphone holder. Sound board Glass tape Microphone holder CN6050 Internal microphone Figure 4-24 Removing the internal microphone Installing the Internal microphone To install the internal microphone, follow the steps below and refer to Figure 4-24. 1. Set the internal microphone into the microphone holder. 2. Install the internal microphone with a microphone holder to the slot. 3. Connect the microphone cable to the connector CN6050 on the sound board and stick the glass tape in place. TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-39
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/275.png)