Toshiba Tecra M5 Maintenance Manual - Page 190
Setting the responder machine
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Intel-made a/b/g) Subtest03 • Disappearance of MAC address data Checking the connection, execute the subtest again. Antenna check & communication test of 11b mode CAUTION: To execute subtest 03-06, use another computer (with Calexico wireless LAN card) that can communicate by the wireless LAN as a responder machine to perform those tests. Access points are also required. (Access point for 802.11a, 802.11b and 802.11g ) Be sure to turn the wireless communication switch ON before executing wireless LAN communication test. (The wireless communication LED lights orange.) Release the write-protection of floppy disk for the test. Setting the responder machine Connect the responder machine to the access points (for 802.11a, 802.11b and 802.11g) with a cross cable and turn on the access points. Insert the floppy disk containing the wireless LAN test program into the FDD of the responder machine and turn on the responder machine. This subtest checks the connection and communication of wireless LAN antenna of Calexico 802.11b mode. After finishing the test, OK message will appear in the display. Press any key and return to the test menu. When a defective is found during the test, NG message will appear in the display. Press any key and following message will appear in the display. Check which antenna (Main/Aux) is defective. * * * Aux Antenna Test : NG !! * * * Press any key and return to the test menu. 3-60 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/190.png)