Toshiba Tecra M5 Maintenance Manual - Page 229
Std. Bi-Direct., USB KB/Mouse Legacy Emulation, Enabled, Disabled
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
3.29 SETUP 3 Tests and Diagnostics (c) Parallel Port Mode The options in this tab are ECP and Standard Bi-directional. ECP Sets the port mode to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) Std. Bi-Direct. This setting should be used with some other parallel devices. 15. Legacy Emulation. (a) USB KB/Mouse Legacy Emulation. Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB KB/Mouse Legacy Emulation item to Enabled. Enabled USB Legacy Support can be used. (Default) Disabled USB Legacy Support cannot be used. (b) USB-FDD Legacy Emulation. Use this option to enable or disable USB-FDD Legacy Emulation. Enabled USB Legacy Support can be used. (Default) Disabled USB Legacy Support cannot be used. (c) USB Memory BIOS Support Type Sets the type of the USB memory as a startup device. HDD Set the type of the USB memory to be equivalent to the HDD (Default). Based on the [HDD] order in the [Boot Priority Options] item. The order with respect to the other HDD can be set in the [HDD Priority Options] item. FDD Set the type of the USB memory to be equivalent to the FDD. Based on the [FDD] order in the [Boot Priority Options] item. TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 3-99
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/229.png)