Toshiba Tecra M5 Maintenance Manual - Page 134
Executing the Diagnostic Test
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3.2 Executing the Diagnostic Test To start the DIAGNOSTIC PROGRAM, follow these steps: 1. Insert the Diagnostics disk in the floppy disk drive. 2. Insert the Diagnostics disk in the USB floppy disk drive and turn on the computer while pressing U key. Then, press Enter and the following menu appears. TOSHIBA Diagnostics Startup Menu (M) Main (I) Initial config set (H) Heatrun Enter a choice: M To start the Diagnostics menu (T&D), press M or m and Enter. To start the H/W initial information setting tool, press I or i and Enter. To start the Heatrun test, press H or h and Enter. NOTE: After replacing the system board or CPU, it is necessary to execute the subtest 01 Initial configuration in 3.3 Setting of the hardware configuration. 3.2.1 Diagnostics menu (T&D) To execute this program, press M or m in the startup menu, press Enter. The following menu appears. TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTICS MENU : 1 - DIAGNOSTIC TEST 2 - ONLY ONE TEST 3 4 - HEAD CLEANING 5 - LOG UTILITIES 6 - RUNNING TEST 7 - FDD UTILITIES 8 - SYSTEM CONFIGURATION 9 - EXIT TO MS-DOS 3-4 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/134.png)