Toshiba Tecra M5 Maintenance Manual - Page 122
Procedure 4, Connector Check and Replacement Check
![]() |
View all Toshiba Tecra M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
2 Troubleshooting Procedures 2.17 Fingerprint sensor Troubleshooting 3. After starting Windows, make sure that the name of Account (e.g. "TOSHIBA"), which has been inputted in item 3 in Procedure 1 at the top of [Start]. Procedure 4 Connector Check and Replacement Check The connector CN9540 on the GF board is connected to the connector CN9700 on the system board. Check 1 Check the GF cable is firmly connected to the connector CN9540 on the GF board and connector CN9700 on the system board. If not, connect it firmly. If the finger sensor is still not functioning properly, perform Check 2. Check 2 The GF cable may be faulty. Replace it with a new one. If the problem persists, perform Check 3. 2-68 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
![](/manual_guide/products/toshiba-tecra-m5-maintenance-manual-729090c/122.png)