Uniden BR330T English Owners Manual - Page 103

Notes: • You can also lock and unlock a search range by pressing Func , selecting the search range then pressing Func + L/O. • If you select 0, the scanner then searches the entire range one time. • The default setting is 2 seconds for each search range. • The scanner moves to the next system or search range after the hold time expires, any current transmission ends, and the channel delay time expires. Editing a Service Search You can change the way service search works for each service. Menu Search for ... Edit Service Select your setting, then press the scroll control. • Set Delay Time This setting determines how long the scanner waits after a transmission ends before resuming quick search or Close Call operation. Select your setting, then press the scroll control. Off The scanner resumes immediately when the transmission ends. 1-5 sec The scanner waits the set amount of time after the transmission ends before resuming. • Set Attenuator This setting controls the attenuator for search operation. Select your setting, then press the scroll control. Off The attenuator is off. On Reception is attenuated by about 18 dB. Searching and Storing 103