Uniden BR330T English Owners Manual - Page 121
Edit Name, Set Frequency, Edit Frequency, Set Modulation, Set Attenuaton, Set Tone, Edit Tone A,
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
the following settings and press EYES to select and modify the selected settings: • Edit Name - Sets the name for the selected toneout setting. • Set Frequency - Sets the tone-outs RF frequency parameters. Edit Frequency - Enter the desired frequency that the scanner should monitor for the tone-out. Set Modulation - Set the modulation type for the paging signal. Auto -The scanner uses the default modulation for the frequency band. If the default modulation is AM or WFM, the modulation operates as FM. FM - The scanner uses FM for the frequency band. This is the default setting. NFM - The scanner uses NFM modulation. Set Attenuaton - Turn the scroll control to select On or Off. • Set Tone - Sets the audio tone frequency for the page. Edit Tone A - Set the audio frequency for Tone A Edit Tone B - Set the audio frequency for Tone B Notes: • For two-tone pages, enter a value for A and B. • For one-tone pages using short tones of less than 3.75 seconds, enter the tone value for A, and 0 (zero) for B. Using WeatheUrsiAnlgerTto(nSeA-MOEu)t 121