Uniden BR330T English Owners Manual - Page 120
Using Tone-Out
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Using Tone-Out Fire Tone-Out Introduction Your scanner can be set to respond to fire tone-outs that use standard two-tone sequential paging, short one-tone paging, and long group tone paging. You can save up to 10 settings. When you select a setting in standby mode, the scanner also monitors for any other setting that uses the same transmit frequency, modulation, and attentuation settings. You need tone-out setup information from the agency you wish to monitor.Check with your local agency or on-line resources. Uniden America Corporation has no information regarding local tone-out systems. Setting Tone-Out Standby Menu Tone-Out for... Tone-Out Standby Turn the scroll control to select the tone-out to monitor. All tone-outs that have the same frequency, modulation, and attenuation setting as the one you select, are also monitored. In standby mode, the display cycles through all monitored tone-out settings.Regardless of the current display, the scanner always alerts on any received toneout that matches a stored setting. If you press HOLD while in standby mode, the scanner temporarily exits the mode and you hear all transmissions on that frequency. No alerts sound, even if a tone-out matches one you have stored. Press HOLD again to return to standby mode. Setting Up Tone-Out Menu Setup Tone-Out for ... Tone-Out Scroll to select the tone-out (1 - 10) you want to program, then press EYES. Then you can scroll to any of 120