Uniden BR330T English Owners Manual - Page 88
Setting System Attenuation, Trunked Systems Only, Deleting Systems
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Notes: • The scanner defaults to AFS (agency, fleet, subfleet) format - the format used in most EDACS systems. • See "EDACS Trunking" on Page 27 for more information about the AFS format. Setting System Attenuation (Trunked Systems Only) Menu Program System Select the system Set Attenuator This setting controls whether the attenuator will be on or off for the current system. Select your setting then press E. Off - the attenuator is off. On - system frequencies are attenuated by about 18 dB. Notes: • Even if ATT appears, attenuation might not work if the bar antenna is turned on and the tuned frequency is from 0.1 to 1.7 MHz. • Turn on this setting if you are near strong signal sources. Attenuation can help reduce interference and desensitization that strong signals create. • You can also turn this setting on or off by holding on a trunked system, then pressing Func + E. Deleting Systems Menu Program System Select the system Delete System The scanner prompts you to confirm deletion. To confirm, press E. To cancel, press . 88