Uniden BR330T English Owners Manual - Page 82
Setting the System Hold Time, Setting the Channel Delay Time
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Setting the System Hold Time Menu Program System Select the system Edit Sys Option Set Hold Time This setting controls how many seconds the scanner scans a system before moving to the next unlocked system. Enter a value from 0-255, then press E to save the setting. Notes: • This setting is available only when a control channel exists in a trunked system. • If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity). • The default setting is 2 seconds for each system. • For conventional systems, all unlocked channels will be scanned at least once regardless of this setting. • The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires. • Due to the control method for these system types, the scanner always scans LTR and EDACS SCAT systems for at least 1 second. Setting the Channel Delay Time Menu Program System Select the system Edit Sys Option Set Delay Time This setting controls how many seconds the scanner waits after a transmission ends before resuming 82