Uniden BR330T English Owners Manual - Page 54
Turning Power Save On or Off, Priority Scan, Using the Backlight
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Turning Power Save On or Off Menu Settings Set Battery Save • On The scanner goes into low-power mode when you monitor a conventional channel that has no activity. • Off Power save is off. Priority Scan Menu Set Priority Or, while holding on any channel, press Func + 1/pri to select one of these priority modes: • Off Normal scanning • On While scanning a conventional system, the scanner interrupts every 2 seconds and checks the priority channels in each unlocked conventional system. Priority channels in lower priority key numbered systems (starting from 1) have highest priority. PRI appears when you select this mode. • Plus On The scanner only scans priority channels in unlocked conventional systems. PRI flashes when you select this mode. OUsthinergStehtetinBgas cklight Menu Settings Set Backlight • 10 sec The backlight stays on for 10 seconds after you press . • 30 sec The backlight stays on for 30 seconds after you press . • Squelch The backlight turns on when the squelch opens then stays on for 5 seconds. • Keypress The backlight turns on when any key is pressed then stays on for 10 seconds. • Infinite The backlight turns on when you press then stays on until you press again. 54