Uniden BR330T English Owners Manual - Page 62
Set CTCSS/DCS, Advanced Options, Set Modulation, Set Attenuator, Set Priority, Set Alert
View all Uniden BR330T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
6. Set the CTCSS/ DCS code, then press E Set CTCSS/DCS Off 7. Press E to enter advanced options (Steps 8-11) or press to skip to Step 12. Advanced Options Yes="E"/ No="." 8. Set the modulation type (Auto is almost always the correct choice), then press E Set Modulation Auto 9. Set the attenuator (turn it on to Set Attenuator eliminate Off interference from other sources), then press E 10. Set the channel priority (turn it on if Set Priority you want the Off scanner to interrupt operation every few seconds to check for transmissions by this driver), then press E 11. Set alert (turn it on if you want the scanner to sound a special alert when this car transmits), then press E Set Alert Off 62
62
6.
Set the CTCSS/
DCS code, then
press
E
7.
Press
E
to enter
advanced options
(Steps 8-11) or
press
to skip to
Step 12.
8.
Set the modulation
type (
Auto
is
almost always the
correct choice),
then press
E
9.
Set the attenuator
(turn it on to
eliminate
interference from
other sources), then press
E
10.
Set the channel
priority (turn it on if
you want the
scanner to interrupt
operation every few
seconds to check
for transmissions by
this driver), then press
E
11.
Set alert (turn it on if
you want the
scanner to sound a
special alert when
this car transmits),
then press
E
Set CTCSS/DCS
Off
Advanced Options
Yes=āEā/ No=ā.ā
Set Modulation
Auto
Set Attenuator
Off
Set Priority
Off
Set Alert
Off