ViewSonic PJ452 User Guide - Page 38

SETUP menu With the SETUP menu, items shown in the table below can be performed. Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description ZOOM Using the buttons ▲/▼ adjusts the zoom (magnifying power). Large ↔ Small KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data ↔ Lower in the data WHISPER • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. • When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible. Using the buttons ▲/▼ turns off/on the whisper mode. NORMAL WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. MIRROR Using the buttons ▲/▼ switches the mode for mirror status. VOLUME NORMAL H:INVERT V:INVERT H&V:INVERT Using the buttons ▲/▼ adjusts the volume. High ↔ Low ViewSonic PJ452 34