ViewSonic PJ452 User Guide - Page 53
Green - cleaning air filter
UPC - 766907174311
View all ViewSonic PJ452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Regarding the indicator lamps (continued) POWER LAMP TEMP indicator indicator indicator Description Blinking Turned Blinking The cooling fan is not operating. in Red off in Red Please turn the power off, and allow the unit to cool or down at least 20 minutes. After the projector has Lighting sufficiently cooled down, please make in Red confirmation that no foreign matter has become caught in the fan, etc. and then turn the power on again. If the same indication is displayed after the treatment, please contact your dealer or service company. Blinking Turned Lighting There is a possibility that the interior portion in Red off in Red has become heated. or Please turn the power off, and allow the unit to cool Lighting down at least 20 minutes. After the projector has in Red sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. ・ Is there blockage of the air passage aperture? ・ Is the air filter dirty? ・ Does the peripheral temperature exceed 35°C? If the same indication is displayed after the treatment, please set the HIGH at the FAN SPEED of the item SERVICE of the OPTION menu. ( 40) Lighting in Green Alternative blinking in Red There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment, resent the power to ON. Lighting in Green Simultaneous blinking in Red It is time to clean the air filter, or there is no air filter. Please immediately turn the power OFF, and clean or change the air filter by referring to the section "Air Filter". After cleaning or changed the lamp, please be sure to reset the filter timer. After the treatment, resent the power to ON. NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the "O" (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. ViewSonic PJ452 49