ViewSonic PJ452 Service Manual - Page 33

7. Wiring diagram ViewSonic Corporation Attach the right and left elevator buttons, and attach the springs on them. First, affix the small iron part in the locations indicated on the diagram, then attach the silver gilding. Important Operations with instructions are areas that have implications with laws/standards. It is possible to be in violation of these laws/standards in the case that these operations are not carried out according to the instructions. Assemble according to the operation instructions. Secure the lamp house, and fix two long screws in the locations indicated on the diagram. 30 Confidential - Do Not Copy Attach the black insulation sheet to the surface of the silver gilding. speaker Affix the fan, and attach black tape. Fix two screws in the locations indicated on the diagram. Note that washers should be inserted underneath the screws. Affix the speaker in the location indicated on the diagram, and secure the wires into the slits indicated in the diagram. C C C Attach the terminal panel to the bottom case, and secure two screws in the locations indicated on the diagram. First, affix the optical engine by using two screws in the locations (a1) (a2) indicated on the diagram, then fix one screw as indicated in the upper part of the diagram (a3). Wiring diagram 1 Secure the lens, fix two screws in the locations indicated on the diagram, and put the foam ring on. PJ452