ViewSonic PJ452 Service Manual - Page 46
RS-232C communication
UPC - 766907174311
View all ViewSonic PJ452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10. RS-232C communication 98 76 54 3 2 1 CONTROL port of the projector RS-232C cable(Cross) - (1) RD (2) TD (3) - (4) GND (5) - (6) RTS (7) CTS (8) - (9) (1) CD (2) RD (3) TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI 1 23 45 67 8 9 RS-232C port of a computer Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable(Cross). Use the cable that fulfills the specification shown in the previous page. (3) Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Communications setting 19200 bps, 8N1 1. Protocol Consist of header (7 bytes) + Command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC flag for command data CRC_high: Upper byte of CRC flag for command data 3. Command Data Command Data Chart byte_0 byte_1 Action low high byte_2 byte_3 Type low high byte_4 byte_5 Setting code low high Action (byte_0 - 1) Action Classification 1 Set 2 Get 4 Increment 5 Decrement 6 Execute Content Change setting to desired value. Read projector internal setup value. Increment setup value by 1. Decrement setup value by 1. Run a command. ViewSonic Corporation Confidential - Do Not Copy PJ452 43