Vtech DS6472-6 User Manual - Page 10
Handset battery charging
View all Vtech DS6472-6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Getting started Handset battery charging Once you have installed the battery, the handset LCD display indicates the battery status (see the table below). NOTES • For best performance, keep the handset in the telephone base or charger when not in use. • The battery is fully charged after 16 hours of continuous charging. • If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays No battery. Battery indicators The screen is blank, or shows Place in charger and flashes. The screen shows Low battery and flashes. The screen shows HANDSET X. Battery status Battery has no or very little charge. The handset cannot be used. Battery has enough charge to be used for a short time. Battery is charged. Action Charge without interruption until the screen shows HANDSET X (at least 30 minutes). Charge without interruption until the screen shows HANDSET X (at least 30 minutes). To keep the battery charged, place it in the telephone base or charger when not in use. When it is fully charged, you can expect the following performance: Operation Operating time While in handset use (talking*) Seven hours While in speakerphone mode (talking*) Five hours While not in use (standby**) Seven days * Operating times vary depending on your actual use and the age of the battery. ** Handset is not charging or in use. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time on page 39. To skip setting, press OFF/CANCEL or BACK. SET DATE 09/30/14 MM/DD/YY BACK SET