Western Digital My Net N750 User Manual - Page 51
ALG Screen, Application Level Gateway ALG Configuration, Enable QoS
View all Western Digital My Net N750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
ADVANCED SETTINGS ALG Screen Application Level Gateway (ALG) Configuration PPTP (Point-to-Point Tunneling Protocol) IPSec (VPN) SIP (Session Initiation Protocol) Turn On (default) PPTP ALG if you use a PPTP client to dial into your corporate network via the Internet. Turn On (default) IPSec ALG if you use a IPSec client to dial into your corporate network via the Internet. A signaling protocol for Internet Telephony. Turn On (default) SIP ALG if you use VoIP telephone service over your Internet connection. Routing Screen Route List Active Name Interface Destination IP Netmask Gateway Select the check box to enable the routing entry. Enter a name for the routing entry. Select the interface (WAN or LAN) for the routing entry. IP address/network to which the data is sent. Enter a Netmask for the Destination IP to define the destination network. Enter the Gateway IP address through which this router can be reached. The Gateway IP should be reachable from your router. FasTrak QoS Screen (My Net N600/My Net N750 Routers) Enable QoS Enable QoS QoS Setup Uplink Speed FasTrack Rules Classification Rules Name Enable or disable the QoS application to prioritize different client applications/traffic types over the Internet. The uplink speed (in Kbps) at which data can be transferred from the router to your ISP. The Auto (default) setting can automatically detect the uplink speed, or you can select other values from the drop-down list or enter your own. QoS prioritizes all Internet traffic based on this setting. Click the Restore Default button to restore the default names and priorities. Name given to the service/client for the classification entry. MY NET ROUTERS 47 USER MANUAL