Western Digital My Net N750 User Manual - Page 80
Troubleshooting, Problem, Solution
View all Western Digital My Net N750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
TROUBLESHOOTING 8 Troubleshooting Problem Solution The power LED does not illuminate. 1. Ensure that the power cord is correctly connected to the router. 2. Ensure that the electrical outlet is working properly. To do this, plug a different electronic device into the outlet and try to power it on. 3. Ensure that you are using the AC adapter provided with the router. A port number LED does not illuminate. 1. Ensure that the connected device is powered on. 2. Ensure that the Ethernet cable(s) are securely connected to the ports on both the device and the router. 3. To ensure that the cable between the router and the electronic device is working properly, replace it with another cable. Computers are unable to access the Internet. 1. Ensure that the router is powered on. The power LED should be solid and not flashing. 2. Check the cable connections between the modem, router and computer. The Ethernet cable connected to your modem should be connected to the Internet port on the router. An Ethernet cable from your computer should be connected to a LAN port on the back of the router. 3. Power off and power on your modem, router, and computer. 4. If all else fails, install My Net View from the product CD or contact Technical Support at http://support.wdc.com or your ISP. (For My Net N900 only) All front panel LEDs flash continuously. 1. Relocate your router to a place that has good ventilation. 2. Turn off your router, and set it aside for 15 to 20 minutes until it cools down. Turn your router back on to resume operation. 3. If the problem persists, contact Technical Support at http://support.wdc.com. MY NET ROUTERS 76 USER MANUAL