Xerox 7760DN User Guide - Page 69
Printing Transparencies from Tray 1 MPT, Transparency, Tray 1 MPT
UPC - 095205225938
View all Xerox 7760DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Printing Transparencies from Tray 1 (MPT) 1. Open Tray 1 (MPT). Printing on Specialty Media 7760-027 2. Insert the transparencies into the tray and adjust the paper guides to match the size of the transparencies. ■ Place the long edge of the transparencies entering the printer first. ■ Do not load more than 50 transparencies. MAX 7760-121 3. When the control panel prompts you to confirm the type and size of paper in the tray: a. Select Change setup, and then press the OK button. b. Select Xerox Transparency, and then press the OK button. c. Select the transparency size, and then press the OK button. Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper to enter the printer first or SEF (Short-Edge Feed) if you loaded the short edge to enter the printer first. 4. In the printer driver, select Transparency as the paper type and/or select Tray 1 (MPT) as the paper source. Phaser® 7760 Color Laser Printer 3-34