Xerox 7760DN User Guide - Page 97
Incomplete Fusing - phaser toner
UPC - 095205225938
View all Xerox 7760DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Incomplete Fusing Problem Solving Print-Quality Problems Toner appears to be missing from the print, or rubs off easily. Solution 1. Verify that the paper you are using is the correct type for the printer. See Supported Paper and Media on page 3-3. 2. Verify that the paper is properly loaded in the tray, and the correct paper type is selected in the Paper Tray Setup menu. See Loading Paper on page 3-9. If the problem continues: 1. Do one of the following: ■ Tray 1 (MPT): Remove and re-insert the paper. ■ Tray 2-5: Open and close the selected paper tray. The control panel prompts you to confirm or change the paper type. 2. On the control panel, select Change, press the OK button, and then do one of the following: ■ Select the correct paper type, and then press the OK button. ■ Select the next heavier type of paper, and then press the OK button. Note: Paper types from lightest to heaviest are: Plain Paper, Heavy Plain Paper, Thin Card Stock, Thick Card Stock, Extra Thick Card Stock. Phaser® 7760 Color Laser Printer 4-10