Xerox 7760DN User Guide - Page 70
Printing Transparencies from Tray 2, Transparency, Tray 2
![]() |
UPC - 095205225938
View all Xerox 7760DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Printing Transparencies from Tray 2 1. Pull out Tray 2. Printing on Specialty Media 7760-023 2. Insert the transparencies into the tray and adjust the paper guides to fit the transparency size. 7760-122 Note: Do not load transparencies above the transparency fill line inside the tray. 3. Push the tray completely into the printer. 4. When the control panel prompts you to confirm the type and size of paper in the tray: a. Select Change setup, and then press the OK button. b. Select the Xerox Transparency, and then press the OK button. c. Select the transparency size, and then press the OK button. Note: For some sizes that can be loaded in either direction, you need to select the size with the letters LEF (Long-Edge Feed) if you loaded the long edge of the paper along the left side of the tray or SEF (Short-Edge Feed) if you loaded the short edge along the left side of the tray. 5. In the printer driver, select Transparency as the paper type and/or select Tray 2 as the paper source. Phaser® 7760 Color Laser Printer 3-35
![](/manual_guide/products/xerox-7760dn-user-guide-3465232/70.png)