Xerox XDM5205DWU Installation Guide - Page 18

Step 4: Connect the USB Cable

Page 18 highlights

Installation 4. Turn on the power switch, located on the back of the scanner to the right of the power port. The status light comes on and flashes indicating that the scanner is receiving power. Step 4: Connect the USB Cable Your DocuMate 520 scanner connects to any available USB port. Check your computer's manual for the USB port locations. NOTE: You do not have to shut off the power to your computer when connecting the scanner to a USB port. 1. Plug the USB cable into the USB port on the scanner. The USB port is identified by its USB symbol. 2. Plug the USB cable into a USB port on the computer, keyboard, or into a USB hub. NOTE: If you have not installed the software, unplug the USB cable from the computer and install the software now. When the software installation is complete, a message tells you to connect the scanner. 12 DocuMate 520 Scanner Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73

Installation
12
DocuMate 520 Scanner Installation Guide
4.
Turn on the power switch, located on the back of the scanner to
the right of the power port.
The status light comes on and flashes indicating that the
scanner is receiving power.
Step 4: Connect the USB Cable
Your DocuMate 520 scanner connects to any available USB port.
Check your computer’s manual for the USB port locations.
1.
Plug the USB cable into the USB port on the scanner. The USB
port is identified by its USB symbol.
2.
Plug the USB cable into a USB port on the computer,
keyboard, or into a USB hub.
NOTE:
You do not have to shut off the power to your computer
when connecting the scanner to a USB port.
NOTE:
If you have not installed the software, unplug the USB
cable from the computer and install the software now. When the
software installation is complete, a message tells you to connect
the scanner.