Yamaha A5000 Owner's Manual - Page 164

RECORDING-MONITOR Knob 5 [ Turn] Click on/off Set this on if you want to output the click sound. If the setting is on, the A5000/A4000 continues to generate the click while you are working in RECORDING mode. [Range] off, on • If the setting is on, the A5000/A4000 will include click information into the samples that you record. The information is set into the sample's parameter data, and does not affect the waveform itself. You can later use the click data as an aid when editing the sample's waveform addresses. • When click is turned on and a sample is recorded, the specified tempo is automatically memorized as the loop tempo for the sample. The loop tempo can be used when specifying the sample's wave and/or loop end addresses (page 120). • Be careful if using the click while recording from a microphone, since it is possible for the microphone to pick up the click sound and record it into the waveform. 164 Chapter 6 RECORD Mode • A5000/A4000 q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q q