Yamaha CDR HD1500 MCXSP10 Manual - Page 50

COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC Copy Level Setting of the sound level for copying. Sound level adjustment is not normally necessary. However it is possible to adjust the copying sound level to suit you needs. Copy Level REC L ALL SYNC ANLG dB R -30 -10 -6 -2 0 CDR Adjustment is possible in the -12dB to +12dB range by 0.4dB steps. Level 0 . 0 d B REC LEVEL L ALL SYNC ANLG dB R -30 -10 -6 -2 0 CDR Memo • Level adjustment is not possible during copying. • If the red part on the peak level meter lights at the loudest sound levels, stop copying to adjust the copying level, and then resume copying. • When copy level is adjusted, the unit automatically creates an image file on the HDD with 1x or 2x speed before starting the disc copy process. Copy Speed Setting of the copying speed. Copy Speed REC L ALL SYNC ANLG dB R -30 -10 -6 -2 0 CDR Initial setting: Best Effort Best Effort Copying is made at Max. 8x speed for a CD-R disc and 4x speed for a CD-RW disc. 4x Copy Copying is always made at 4x speed. Memo • Depending on the condition of the CD-R disc, the copy speed may drop automatically even when "Best Effort" is selected. • When "Analog Copy" or "Auto Dig/Anlg" is selected in "Copy Method" (P.43), the unit automatically creates an image file on the HDD with 1x or 2x speed before starting the disc copy process. • The settings is stored in the memory and applied to future copying. Imaging Speed When copy level is adjusted or when carrying out an analog copy, the unit automatically creates an image file on the HDD before starting the disc copy process. By this setting, you can select 2x or 1x speed applied for an image file creation process. I m a g i n g S p e e d REC L ALL SYNC ANLG dB R -30 -10 -6 -2 0 CDR Initial setting: 2x 2x An image file is made at 2x speed. 1x An image file is made at 1x speed. 44