Yamaha CLP-240 Owner's Manual - Page 12
Setting the Volume, Using Headphones, Using the Speaker Switch
View all Yamaha CLP-240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH Before Using the Clavinova Setting the Volume Initially set the [MASTER VOLUME] slider about halfway between the "MIN" and "MAX" settings. Then, when you start playing, re-adjust the [MASTER VOLUME] slider to the most comfortable listening level. MIN MAX The level decreases. MASTER VOLUME The level increases. CAUTION Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound NOTE You can also adjust the [PHONES] output level and the AUX IN input level using the [MASTER VOLUME] slider. Using Headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) bottom surface OFF ON NORMAL HP. SW SPEAKER PHONES standard stereo phone plug Using the Headphone Hanger A headphone hanger is included in the CLP-240/230 package so that you can hang the headphones on the Clavinova. Install the headphone hanger using included two screws (4 × 10mm) as shown in the figure. CAUTION Do not hang anything other than the headphones on the hanger. Otherwise, the Clavinova or the hanger may be damaged. Using the Speaker Switch OFF ON This switch turns the internal speakers on or off. NORMAL HP. SW SPEAKER NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of headphones is not connected. PHONES ON The speakers always produce sound. OFF The speakers produce no sound. 12 CLP-240/230 Owner's Manual