Yamaha CLP-240 Owner's Manual - Page 50

ENGLISH Detailed Settings - [FUNCTION] F4. (CLP-240) Split Mode Functions This menu enables you to make various detailed settings for Split mode. By changing the split point or other setting, you can optimize the settings for the songs you play. 1. Select the voices in Split mode, then engage the Function mode and select . 2. Press the [+/YES] button to engage the Split mode function's sub-mode, then use the [TEMPO/FUNCTION# ▼, ▲] buttons to select the desired sub-mode. Press the [-/NO] [+/ YES] button to assign values. NOTE If Split mode is not engaged, will appear instead of and you will be unable to select Split mode functions. Also note that you must exit Function mode before you can engage Split mode. Sub-mode F4.1: Split Point Setting range: The entire keyboard Normal setting: F 2 Set the point on the keyboard that separates the right and left-hand sections (split point). The pressed key is included in the left-hand range. • Instead of pressing the [-/NO] [+/YES] buttons, you can engage the split point by pressing the appropriate key on the keyboard. • If Function mode is not engaged, you can change the split point to any other key by pressing the key while holding the [SPLIT] button (page 26). • An example of a key name indication for a split point (F 2) (G2) (A 2) followed by a high bar if sharp followed by a low bar if flat F4.2: Split Balance Setting range: 0 - 20 (A setting of "10" produces an equal balance between the two Split mode voices. Settings below "10" increase the volume of the left voice in relation to the right voice, and settings above "10" increase the volume of the right voice in relation to the left voice.) Normal setting: Different for each voice combination. The volume level of the two voices combined in Split mode can be adjusted as required. You can make this setting for each combination of voices individually. F4.3: Right Voice Octave Shift F4.4: Left Voice Octave Shift Setting range: -1, 0, 1 Normal setting: Different for each voice combination You can shift the pitch up and down in octave steps for the Right Voice and Left Voice independently. Make a setting depending on the note range of the songs you play. You can make this setting for each combination of voices individually. F4.5: Right Voice Effect Depth F4.6: Left Voice Effect Depth Setting range: 0 - 20 Normal setting: Different for each voice combination These functions make it possible to individually set the depth of the effect for the left and right Split mode voices. The effect depth settings cannot be changed unless the [EFFECT] is ON. You must exit Function mode before you can turn on an [EFFECT]. You can make this setting for each combination of voices individually. F4.7: Damper Pedal Range Setting range: ALL (for both voices) 1 (for the right Voice) 2 (for the left Voice) Normal setting: ALL The Damper Pedal Range function determines whether the damper pedal affects the right voice, the left voice, or both the left and right voices in Split mode. F4.8: Reset This function resets all Split mode functions to their default values. Press the [+/YES] button to reset the values. NOTE SHORTCUT: You can jump directly to Split mode functions by pressing the [TEMPO/FUNCTION#] button while holding the [SPLIT] but- ton. To exit Function mode, you still need to press the [TEMPO/ FUNCTION#] button so that the TEMPO indicator lights up. 50 CLP-240/230 Owner's Manual