Yamaha CLP-240 Owner's Manual - Page 22

ENGLISH Selecting & Playing Voices Procedure Pressing the [REVERB] button repeatedly toggles the reverb on and off. The indicators light in sequence each time the [REVERB] button is pressed. No effect is produced when all indicators are off. Adjusting Reverb Depth Adjust the reverb depth for the selected voice by using the [-/NO] [+/YES] buttons while holding the [REVERB] button. The depth range is from 0 through 20. The current depth setting appears on the LED display while the [REVERB] button is held. [EFFECT] The [EFFECT] button allows you to select an effect to give your sound greater depth and animation. OFF: When no effect is selected, no EFFECT indicator is lit. CHORUS: A shimmering, broadening effect PHASER: Adds a sweeping effect to the sound. TREMOLO: Tremolo effect ROTARY SP: Adds the vibrato effect of a rotary speaker. Procedure To select an effect type, press the [EFFECT] button a few times until the indicator corresponding to the desired type lights (the indicators light in sequence each time you press the [EFFECT] button). No effect is produced when all indicators are off. Adjusting Effect Depth You can adjust the effect depth for the selected voice by using the [-/NO] and [+/YES] buttons while holding the [EFFECT] button. The depth range is from 0 through 20. The current depth setting appears on the LED display while the [EFFECT] button is held. [DDE] (CLP-240) The DDE (Dynamic Damper Effect) lets you hear a simulation of the sustain sound of the damper pedal on a grand piano, as you press the damper pedal and play the keyboard. This effect is applied to the entire sound of the instrument. Procedure Pressing the [DDE] button repeatedly toggles the DDE on and off. Adjusting DDE Depth You can adjust the DDE depth by using the [-/NO] and [+/YES] buttons while holding the [DDE] button. The depth range is from 0 through 20. The current depth setting appears on the LED display while the [DDE] button is held. NOTE Releasing the [REVERB] button changes the reverb type. If you are changing the reverb depth by holding the [REVERB] button, pressing the [REVERB] button will not change the reverb type. NOTE Depth 0: no effect Depth 20: maximum reverb depth NOTE Default depth settings are different for each voice. NOTE The default effect type (including OFF) and depth settings are different for each voice. NOTE Releasing the [EFFECT] button changes the effect type. If you are changing the depth settings by holding the [EFFECT] button, pressing the [EFFECT] button will not change the effect type. NOTE Depth 0: no effect Depth 20: maximum effect depth NOTE Default depth settings are different for each voice. NOTE Normal setting = ON NOTE Depth 0: no effect Depth 20: maximum DDE depth 22 CLP-240/230 Owner's Manual