Yamaha CRX-M5 Owner's Manual - Page 25

6 Press TUNING //? repeatedly to select the timer play mode. Each time you press TUNING //?, the timer play mode changes as follows: PLAY AI REC • When you select "PLAY" mode Normal timer play mode is set. In this mode, set the volume level for timer play manually. • When you select "AI" mode The AI timer mode is set. In this mode, the volume level for timer play is set to VOL 18 automatically. When the unit turns on, the volume level increases gradually from VOL 18 to VOL 41. If you press another button while the volume level is gradually increasing, the volume stops increasing . • When you select "REC" mode This mode is for timer recording. See "Timer recording radio programs using the MDX-M5 or KX-M5" on this page. 7 Press SET. 8 Press TUNING //? repeatedly so that the desired source appears in the display. Each time you press TUNING //?, the source changes as follows: TUNER CD TAPE AUX/MD 9 • When you select CD, TAPE, or AUX/MD in step 8 above Press SET. • When you select TUNER in step 8 above Press SET twice. If you select "PLAY" mode in step 6, set the level of volume by pressing TUNING //?, then press SET. 10 Press POWER to turn off the unit. The unit is in standby mode for timer play. To cancel timer play Press TIMER so that "TIMER" disappears from the display. GettPinlagyiSntgarCteDds USING THE BUILT-IN TIMER Timer recording radio programs using the MDX-M5 or KX-M5 By using the built-in timer, you can record radio programs automatically on the MDX-M5 or KX-M5. For details on recordings, refer to the instructions supplied with the MDX-M5 or KX-M5. POWER CT / TIMER CLOCK SET RDS PTY RT TIME REP EDIT TUNING FM/AM ST/MONO DISC 1 2 3 MEMORY PRESET PGM / TUNER CD 1 2 3 4 5 6 7 8 9 0 REC/ REC/ PAUSE MUTE CD SYNC / +10 TAPE MD INPUT SLEEP MUTE VOLUME -+ SET TUNING //? 1 Load a blank tape into the KX-M5 or a blank MD into the MDX-M5. 2 Follow steps 1 to 5 on "Timer play" of the previous page. 3 Press TUNING //? repeatedly so that "REC" appears in the display, then press SET. TIMER REC 4 Press SET again after checking the frequency. If you want to record from another station, before pressing SET, press TUNING //? to select the desired radio station (see page 13), then press SET. (Continued) E-19 English