Yamaha HTR 5890 MCXSP10 Manual - Page 35

PREPARATION p BASIC SETUP BASIC SETUP The basic system parameters are set automatically when you run auto setup (page 26). Basic setup is useful if you want to quickly setup your speakers or to manually adjust some of the items set in auto setup. y If you wish to configure the unit manually using more precise adjustments, use the detailed parameters in SOUND MENU (page 55) instead of BASIC MENU. Note Altering any parameters in BASIC MENU will reset all parameters in SOUND MENU. Using BASIC MENU 2-9 SELECT ++ TV VOL CH -- A/B/C/D/E TV MUTE TV INPUT + VOL - AMP SOURCE TV MUTE LEVEL TITLE SET MENU MENU PURE DIRECT ENTER NIGHT AUDIO TEST RETURN ON SCREEN DISPLAY STRAIGHT EFFECT 1 1 Set AMP/SOURCE/TV to AMP, then press SET MENU to enter the SET MENU. AMP SOURCE TV then SET MENU MENU 2 Press k / n repeatedly to select MANUAL SETUP, then press l / h to enter the selected category. 3 Press l / h to enter BASIC MENU. 4 When ROOM is selected, press l / h to change the setting. Select the size of the room you have installed your speakers in. Roughly speaking, the room sizes are defined as follows: S (small) 16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2) M (medium) 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2) L (large) 26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2) 1 BASIC MENU 1/2 . ROOM : S [M L SWFR : [YES NONE PRESENCE;;;;NONE SPEAKERS;;;;7spk 5 Press n to select SWFR, then press l / h to select: YES If you have a subwoofer in your system. NONE If you do not have a subwoofer in your system. 6 Press n to select PRESENCE, then press l / h to select: YES NONE If you have presence speakers in your system. If you do not have presence speakers in your system. ENTER then ENTER p SET MENU ;AUTO SETUP . ;MANUAL SETUP / : Up/Down : Enter If k is pressed when AUTO SETUP is selected, or if n is pressed when MANUAL SETUP is selected, SET MENU will be closed. Press SET MENU to open SET MENU again. 31