Yamaha HTR 5890 MCXSP10 Manual - Page 73

REMOTE CONTROL FEATURES 4 Press LEARN using a ballpoint pen or similar object. "LEARN" and the selected component name (ex. "DVD") appear alternately in the display window. 7 Press LEARN again to exit the learning mode. LEARN TEST RETURN LEVEL TITLE TV VOL DTV LEARN Notes • Do not press and hold LEARN. If you hold it down for more than 3 seconds, the remote enters the remote control code setting mode. • If you do not complete each of the following steps within 30 seconds, the learning mode will be automatically canceled. In this case, press LEARN again. 5 Press the button for which you want to program the new function. "LEARN" appears in the display window. A POWER TV Notes • "ERROR" appears in the display window if you press a button not indicated in the respective step, or when you press more than one button simultaneously. • This remote control can learn approximately 200 functions. However, depending on the signals learned, "FULL" may appear in the display before you program 200 functions. In this case, clear unnecessary programmed functions to make room for further learning. • Learning may not be possible in the following cases: - When the batteries in the remote control for this unit or other components are weak. - When the distance between the two remote controls is too great or too small. - When the remote control infrared windows are not facing each other at the appropriate angle. - When the remote control is exposed to direct sunlight. - When the function to be programmed is continuous or uncommon. PHONO TUNER POWER AV B V-AUX CBL/SAT MD/TAPE PRESET ++ -- A/B/C/D/E TV MUTE TV INPUT TRANSMIT STANDBY INPUT MODE SLEEP CD VCR 1 DVR/VCR2 DVD CH ENTER SET MENU MENU + VOL - MUTE ON SCREEN STRAIGHT DISPLAY SYSTEM POWER MULTI CH IN CD-R SELECT AMP SOURCE TV PURE DIRECT NIGHT AUDIO 6 Press and hold the button you want to program on the other remote control until "OK" appears in the display window. "NG" appears in the display window if learning was unsuccessful. In this case, start over from step 5. ADVANCED OPERATION POWER TV A PHONO TUNER POWER AV B V-AUX CBL/SAT MD/TAPE DTV TRANSMIT STANDBY INPUT MODE SLEEP CD VCR 1 DVR/VCR2 DVD SYSTEM POWER MULTI CH IN CD-R SELECT y • If you want to program another function, repeat steps 5 and 6. • If you continuously want to program another function for another component, press the input selector button or SELECT k/n to select the component, then repeat steps 3 through 6. 69