Yamaha HTR 5890 MCXSP10 Manual - Page 68
Ezone Set
UPC - 027108922133
View all Yamaha HTR 5890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
p p SET MENU ■ Zone set E)ZONE SET E)ZONE SET SP B;;;;;;MAIN / : Exit : Main Speakers B SP B Use to specify the location of speakers connected the SPEAKERS B terminals. Choices: MAIN, ZONE B • Select "MAIN" to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room. • Select "ZONE B" if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only. Notes • If you select "ZONE B" and connect headphones to the PHONES jack on the unit, the sound is output from both headphones and SPEAKERS B. • When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode. ■ Zone 2 set F)ZONE2 SET p p Zone 2 amplifier ZONE2 AMP Use to select how the ZONE 2 speakers will be amplified. Choices: ON, OFF • Select "OFF" if you do not use Zone 2 speakers or if you connect your Zone 2 speakers through an external amplifier connected to this unit's ZONE 2 OUTPUT jacks. • Select "ON" to use this unit's internal amplifier if you connect your Zone 2 speakers directly to this unit's PRESENCE/ZONE 2 speaker terminals. ■ Zone 3 set G)ZONE3 SET G)ZONE3 SET OUTPUT VOL;;VAR. / : Exit : Select Output volume OUTPUT VOL Use to select how the volume control will operate with regard to the ZONE 3 OUTPUT jacks. Choices: VAR., FIX • Select "VAR." to adjust the ZONE 3 OUTPUT volume simultaneously with VOL -/+ on the remote control. • Select "FIX" to fix the ZONE 3 OUTPUT volume level to a standard line level. F)ZONE2 SET OUTPUT VOL;;VAR. ZONE2 AMP....OFF / : Up/Down : Select p p Output volume OUTPUT VOL Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks. Choices: VAR., FIX • Select "VAR." to adjust the ZONE 2 OUTPUT volume simultaneously with VOL -/+ on the remote control. • Select "FIX" to fix the ZONE 2 OUTPUT volume level to a standard line level. 64