Yamaha HTR 5890 MCXSP10 Manual - Page 41
Enjoying 2-channel software in surround, Listening to high fidelity stereo sound, with PURE DIRECT
UPC - 027108922133
View all Yamaha HTR 5890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
■ Enjoying 2-channel software in surround Signals input from 2-channel sources can also be played back on multiple channels. Press STANDARD on the remote control to select the decoder. STANDARD 0 You can select from the following modes depending on the type of software you are playing and your personal preference. PRO LOGIC SUR. STANDARD Standard processing for Dolby Surround sources. PRO LOGIC SUR. ENHANCED CINEMA DSP enhanced processing for Dolby Surround sources. PRO LOGIC IIx Movie* Dolby Pro Logic II/IIx processing for movie software. PRO LOGIC IIx Music* Dolby Pro Logic II/IIx processing for music software. PRO LOGIC IIx Game* Dolby Pro Logic II/IIx processing for game software. DTS Neo:6 Cinema DTS processing for movie software. DTS Neo:6 Music DTS processing for music software. * Use the PLII/PLIIx parameter to select the Pro Logic II or Pro Logic IIx decoders (see page 85). Note The Pro Logic IIx decoder is not available when SURR B L/R SP is set to "NONE" (see page 56). PLAYBACK ■ Listening to high fidelity stereo sound with PURE DIRECT PURE DIRECT bypasses this unit's decoders and DSP processors as well as shuts down the video circuitry, allowing you to enjoy the highest possible sound fidelity from analog and PCM sources. Press PURE DIRECT to activate pure direct. The button lights up and the front panel display automatically goes out. PURE DIRECT or PURE DIRECT Front panel Remote control y The front panel display switches on momentarily when an operation is performed. To cancel, press PURE DIRECT again. The indicator around the front panel button goes out and the previous settings are restored. Notes • To avoid unexpected noise, do not play DTS-encoded CDs in this mode. • When a multi-channel signal (Dolby Digital or DTS) is input, this unit automatically switches to the corresponding analog input. (When DTS is selected as an input mode, no sound will be heard.) • No sound will be output from the subwoofer. • TONE CONTROL (page 35) and SET MENU (page 53) settings are not effective. • The following operations are not possible during PURE DIRECT operation: - switching the sound field program - displaying the OSD - adjusting SET MENU parameters - all video functions (video conversion etc.) • PURE DIRECT is automatically cancelled whenever this unit is set to the standby mode. BASIC OPERATION 37