Yamaha HTR 5890 MCXSP10 Manual - Page 85
Resetting parameters to the factory, values, ADDITIONAL, INFORMATION - factory reset
UPC - 027108922133
View all Yamaha HTR 5890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4 Press k / n to select the parameters. ENTER 5 Press l / h to change the parameter value. When you set a parameter to a ENTER value other than the factory preset, an asterisk mark (*) appears by the parameter name on the video monitor. 6 Repeat steps 3 through 5 as necessary to change other program parameters. Notes • The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, press k / n. • You cannot change parameter values when MEMORY GUARD is set to "ON". If you want to change the parameter values, set MEMORY GUARD to "OFF" (see page 63). Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again. ■ Resetting parameters to the factory values To reset a certain parameter Select the parameter you want to reset, then press l / h repeatedly until the asterisk mark (*) next to the parameter name disappears from the video monitor. To reset all parameters Use PARAM.INI (see page 63). EDITING SOUND FIELD PARAMETERS ADDITIONAL INFORMATION 81