Yamaha HTR 5890 MCXSP10 Manual - Page 54

ADVANCED OPERATIONS ADVANCED OPERATIONS Selecting the OSD mode You can display this unit's operating information on a video monitor. If you display the SET MENU and sound field program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information in the front panel display. 1 Turn on the video monitor connected to this unit. 2 Press ON SCREEN repeatedly to change the OSD mode. The OSD mode changes in the following order: full display, short ON SCREEN DISPLAY display, and display off. Full display Always shows the sound field program parameter settings as well as the contents of the front panel display. Short display Briefly shows the contents of the front panel display at the bottom of the screen each time you operate this unit. Display off Only operations performed using ON SCREEN are displayed. The OSD is displayed when using SET MENU or the test tone feature, even if the OSD mode is set to "Display off". P08 Sci-Fi . DSP LEVEL;;;;0dB P.INIT DLY;;16ms P.ROOM SIZE;;1.0 S.INIT DLY;;20ms S.ROOM SIZE;;1.0 P08 MOVIE THEATER Sci-Fi Full display Short display Notes • The OSD signal is not output to the REC OUT jack, and will not be recorded. • When the component video signals are input, short display is not output to the COMPONENT VIDEO MONITOR OUT jacks. • You can set the OSD to turn on (gray background) or off when a video source is not being reproduced (or the source component is turned off) by using DISPLAY SET (see page 62). Using the sleep timer Use this feature to automatically set this unit in the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLETS. ■ Setting the sleep timer POWER TV TRANSMIT POWER AV STANDBY SYSTEM POWER A B INPUT MODE SLEEP PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD 2 SELECT 1 Select a source and start playback on the source component. 2 Press SLEEP repeatedly to set the amount of time. SLEEP Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for the sleep timer. SLEEP 120 min. SLEEP 90 min. SLEEP OFF SLEEP 30 min. SLEEP 60 min. V-AUX DVR/VCR2 SLEEP VCR 1 CBL/SAT DTV SP A SLEEP DVD MD/TAPE CD-R CD TUNER PHONO dB VOLUME 120min L R The SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. V-AUX DVR/VCR2 SLEEP VCR 1 CBL/SAT DTV DVD MD/TAPE CD-R CD SP A CONCERT HALL TUNER PHONO dB VOLUME LR 50