Yamaha HTR 5890 MCXSP10 Manual - Page 82
Remote controlling Zone 2/Zone 3, To enable Zone mode on the remote, control
UPC - 027108922133
View all Yamaha HTR 5890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ZONE 2/ZONE 3 Using this unit's internal amplifier To use this unit's internal amplifier, set ZONE 2 AMP to ON in SET MENU (see page 64). R L + - PRESENCE/ ZONE 2 Second room This unit Remote controlling Zone 2/Zone 3 The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room. ■ To enable Zone mode on the remote control You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/ - to control the selected room. ■ To control Zone 2/Zone 3 1 Press SELECT k repeatedly to display "ZONE 2" or "ZONE 3" in the display window. SELECT or 1 Repeat steps 1 and 2 of the procedure in "Setting remote control codes" on page 66. 2 Press l / h to select "L:AMP". 3 Press ENTER. "2000" appears in the display window. 4 Enter the code number "2001". 2 Press SYSTEM POWER to turn Zone 2 or Zone 3 power on. 3 Press an input selector button to select the input source you want to listen to in the second/third room. The display window shows "2: name of selected input" or "3: name of selected input" if the remote control is in the Zone 2/Zone 3 mode. A B INPUT MODE SLEEP PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD 5 Press ENTER to set the number. "OK" appears in the display window if setting was successful. 6 Press LEARN to complete the Zone setup. The remote control will be able to operate this unit from Zone 2 or Zone 3. LEARN Note Signals input to V-AUX and PHONO jacks cannot be sent to Zone 2/Zone 3. 78