Yamaha QL1 Reference Manual - Page 14
Input and output patching, Input patching, QL console internal patching and Dante audio network
View all Yamaha QL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Input and output patching This chapter explains how to edit the input patching and output patching, how to connect inserts, and how to use direct outputs. When the QL series is in the initial state, the following input ports (jacks/ports) are patched to each input channel. For QL5 Input channels CH1-32 CH33-48 CH49-64 ST IN1-4 Input port (jack/port) INPUT1-32 DANTE1-16 DANTE17-32 FX5L(A)-FX8R(B) For QL1 CH1-16 CH17-32 ST IN1-4 Input channels Input port (jack/port) INPUT1-16 DANTE1-16 FX5L(A)-FX8R(B) When the QL is in the initial state, the output ports (jacks/ports) are patched to the following output channels. Output port (jack/port) OMNI OUT1-14*1 OMNI OUT15-16*3 DANTE1-16 DANTE17-24 DANTE25-26 DANTE27 DANTE28-29 DANTE30 DANTE31-32 SLOT1(1)-(16) SLOT2(1)-(8) SLOT2(9)-(10) SLOT2(11) SLOT2(12)-(13) SLOT2(14) MIX1-14*2 STEREO L/R MIX1-16 MATRIX1-8 STEREO L/R MONO MONITOR L/R MONITOR C CUE L/R MIX1-16 MATRIX1-8 STEREO L/R MONO MONITOR L/R MONITOR C Output channels Input and output patching Output port (jack/port) SLOT2(15)-(16) FX5A(L), FX6A(L), FX7A(L), FX8A(L) DIGITAL OUT L/R RECORDER IN L/R * 1. QL1: OMNI OUT1-6 *2. QL1: MIX1-6 *3. QL1: OMNI OUT7-8 CUE L/R MIX13-16 STEREO L/R STEREO L/R Output channels Input patching QL series consoles and I/O devices feature two types of patching: Dante audio network patching and QL console internal patching. For Dante audio network patching, you will use the DANTE INPUT PATCH window. In this window, you can patch the QL console and I/O device inputs. Sixty-four (64) channels for the QL5 and thirty-two (32) channels for the QL1 can be input from a DANTE audio network. Choose channels from Dante audio network signals and select the I/O devices that you want to control from the QL series console. Then, route the input signals (that were patched in the DANTE INPUT PATCH window) to channels on the QL series console. To do this, choose input ports from DANTE 1-64 (for QL5) or DANTE1-32 (for QL1) in the GAIN/PATCH window. Output patching Use the OUTPUT PORT window to patch QL console's output channels and Dante audio network. In this window, assign output channel signals to DANTE 1-64 ports (for QL5) or DANTE 1-32 ports (for QL1). Next, patch the output signals from DANTE 1-64 (for QL5) or DANTE 1-32 (for QL1) (assigned in the OUTPUT PORT window) to I/O device outputs. Use the OUTPUT PATCH window of the I/O DEVICE to make these assignments. QL console internal patching and Dante audio network patching The following diagram shows the signal flow through the QL series console, I/O devices, and Dante audio network. I/O Device ID #3 Dante-MY16-AUD Dante Network SW I/O device ID #1 I/O device ID #2 Dante patching ANALOG INPUT MY MY 32: QL5 16: QL1 16 16 INPUT PATCH QL series console "Dante" (ports) 64: QL5 32: QL1 QL series internal patching 14 Reference Manual