Yamaha QL1 Reference Manual - Page 35
MIX SEND/MATRIX SEND window, ALL PRE button, Send destination indicator
View all Yamaha QL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
If the MIX/MATRIX bus is a stereo bus You can link the main parameters of two adjacent odd/even-numbered MIX/MATRIX buses. If the send-destination MIX/MATRIX bus is assigned as stereo, the left knob of the two adjacent TO MIX/MATRIX SEND LEVEL knobs will operate as the TO MIX/MATRIX PAN knob. (If BALANCE mode is selected in the TO STEREO/MONO window, it will operate as a BALANCE knob). NOTE • For an INPUT channel (monaural), the right knob will adjust the common send level to the two MIX/MATRIX buses, and the left knob will adjust the panning between the two MIX/MATRIX buses. Rotating the left TO MIX/MATRIX SEND PAN knob counter-clockwise will increase the amount of signal sent to the odd-numbered MIX/MATRIX bus, and rotating it clockwise will increase the amount sent to the even-numbered MIX/MATRIX bus. • For a ST IN channel (stereo), if BALANCE mode has been selected in the TO STEREO/MONO window (8ch), the right knob adjusts the common send level for the two MIX/MATRIX buses, and the left knob adjusts the volume balance of the left and right signals sent to the two MIX/MATRIX buses. Rotating the left TO MIX/MATRIX SEND BAL knob counter-clockwise will increase the amount of signal sent from the L-channel to the odd-numbered MIX/MATRIX bus, and rotating it clockwise will increase the amount sent from the R-channel to the even-numbered MIX/MATRIX bus. If PAN mode has been selected in the TO STEREO/MONO window (8ch), the left knob will function as the PAN knob. The right knob will function as send level, just as in BALANCE mode. MIX SEND/MATRIX SEND window 3 12 4 4 5 5 6 6 7 7 8 8 9 9 Input channels 3 12 1 ALL PRE button Sets the send point to PRE. (The send point is the point at which signals are sent from all send-source channels - including the input and output channels - to the selected send destination.) At this time, the PRE/POST button will light. 2 ALL POST button Sets the send point to POST. (The send point is the point at which signals are sent from all send-source channels - including the input and output channels - to the selected send destination.) At this time, the PRE/POST button will turn off. 3 Send destination indicator Indicates the currently-selected send destination. 4 Send destination select buttons Select MIX/MATRIX buses as the send destination. 5 Channel select button Selects the send-source channel that you wish to control. The current channel icon, number, and color appear on the button, and the channel name appears below the button. 6 PRE/POST button Switches the send point of each send-source channel between PRE and POST. If the button is lit, the send point is set to PRE. NOTE • If the PRE/POST button is on, you can also select PRE EQ (immediately before the EQ) or PRE FADER (immediately before the fader) for each MIX/MATRIX bus. This setting is made in the BUS SETUP window (page 189). • The PRE/POST button is not displayed for FIXED type MIX buses. 7 SEND ON/OFF button Switches the send of each send-source channel on or off. 35 Reference Manual