Yamaha QL1 Reference Manual - Page 215

Warning/Error Messages Message xxx Parameters Copied. xxx Parameters Initialized. xxx Parameters Pasted. xxx Parameters Swapped with Copy Buffer. ALTERNATE FUNCTION: Turned off! Cannot Assign! Cannot Bookmark This Popup. Cannot Mount This Type of Device in This Position. Cannot Paste to Different Parameter Type! Cannot Paste! Cannot Recall! Cannot Select This Channel. Cannot Store! Cannot Undo! Channel Copied. Channel Moved. Channel Returned to Default Settings. Console initialized due to memory mismatch. Corrupted data fixed! Couldn't Access File. Couldn't Write File. Current User Changed. [xxx] DANTE audio resource overflow. DANTE Connection Error! DANTE is not working by GIGA bit. DANTE is working at Secondary. DANTE module Error! Different File Format! Some Data was not Loaded. Meaning Parameter xxx was copied to the copy buffer. Parameter xxx was initialized. Parameter xxx was pasted from the copy buffer. Parameter xxx was exchanged with the contents of the copy buffer. ALTERNATE FUNCTION was turned off. In the USER DEFINED KEYS popup of the QL1, you attempted to edit an item that cannot be edited for that model. This popup window cannot be bookmarked. You attempted to mount a specific device at a position where it cannot be mounted. Parameters of one type cannot be pasted to another different type. Cannot paste the character string. Failed to recall a scene memory or library. You attempted to select a channel that cannot be operated due to your user level or some other reason. Failed to store a scene memory or library. You pressed the UNDO button when Undo was not available. Channel settings have been copied. Channel settings have been moved. Channel settings have been returned to the default settings. All data has been initialized because the data in internal backup memory has been lost, due to an update or failure of the backup battery or some other reason. Please contact your Yamaha service center listed at the end of the Owner's Manual (separate document). Data has been repaired. File on the USB flash drive could not be accessed for some reason. File could not be saved to the USB flash drive. Current user was changed to [xxx]. Audio resources are not enough for the Dante audio network. You have the wrong connection of PRIMARY and SECONDARY in the daisy chain network. The Dante audio network is not functioning as Giga-bit Ethernet. The Dante audio network is operating in the SECONDARY PORT. The Dante module has malfunctioned. Data was loaded in a format that is not supported. Message Directory Not Empty! Editor: Data Framing Error! Editor: Data Overrun! Editor: Rx Buffer Full! Editor: Tx Buffer Full! EFFECT CUE: Turned Off. Error occurred at Secondary Port. External HA Connection Conflict! File Access is Busy! File Already Exists! File Error [xx]! File Protected! Flash Memory Initializing Finished. Help File Not Found! Illegal Address! Illegal DIP Switch Setting. Illegal MAC Address! Cannot Use Ethernet. Illegal MAC Address! Illegal Storage Format! KEY IN CUE: Turned Off. Loading Aborted. Loading Finished. Low Battery! Maximum Number of Audio Files Exceeded! Memory Error. MIDI: Data Framing Error! MIDI: Data Overrun! MIDI: Rx Buffer Full! MIDI: Tx Buffer Full! 215 Warning/Error Messages Meaning You attempted to delete a directory, but failed because there were files remaining in the directory. Invalid signals are being exchanged with QL Editor. Too much data is being received at the QL Editor input port. Too much data is being transmitted from the QL Editor output port. CUE was defeated because you switched from the EFFECT popup window or the premium rack popup window to a different screen. The Ethernet cable of the SECONDARY connector has been removed during the REDUNDANT setting. External HA data could not be recalled, because the state of connections to the external HA has changed since the scene was stored. The following operation has not been performed yet because the USB flash drive is being accessed. The USB flash drive already contains a file/directory with the same name as the one you are attempting to save, rename, or create. Internal file access error Overwriting was not possible because the file on the USB flash drive is write-protected. Memory initialization has been completed. The help file has not been loaded. The IP address or Gateway address setting is invalid. The DIP switches of the R series are not set correctly. Communication via the Network connector is not possible because the MAC address setting has been damaged for some reason. Please contact your Yamaha service center listed at the end of the Owner's Manual (separate document). The QL series started up with an illegal MAC Address. The USB flash drive could not be accessed because its format is invalid or unsupported. KEY IN CUE was defeated because you switched from the DYNAMICS 1 popup window of an input channel to a different screen. Loading from USB flash drive was aborted. Finished loading from USB flash drive. The backup battery voltage is low. The number of songs that can be managed by the USB memory recorder has been exceeded. The backup memory of the R series has been corrupted. An inappropriate signal is being input to the MIDI input port. Too much data is being received at the MIDI input port. Too much data is being transmitted from the MIDI output port. Reference Manual