Yamaha QL1 Reference Manual - Page 172

Setup FUNCTION PARAMETER 1 PARAMETER 2 PAGE CHANGE BOOKMARK BOOKMARK with "SEL" - PREVIOUS PAGE NEXT PAGE CLOSE POPUP - - PLAY/PAUSE, STOP, FF/NEXT, REW/PREVIOUS, REC TRANSPORT AUTO REC RECORDER DIRECT PLAY REC & START NO ASSIGN (TITLE 1) : SCENE INC RECALL DEC RECALL DIRECT RECALL RECALL UNDO STORE UNDO INC DEC RECALL STORE SEND MODE MIX/MATRIX - - SCENE #000-#300 - - - - - - - MIX1-MIX16 MTRX1-MTRX8 SENDS ON FADER MIX ON FADER - MATRIX ON FADER SENDS ON FADER Explanation Memorize the currently-selected screen (hold down the key for two seconds or longer), or display the last-memorized screen (press and release the key within two seconds). Screens can also be memorized. In the case of a rack, the number of that rack is also memorized. Memorize the above BOOKMARK with the addition of the SEL status. Display the previous/next page. Close the displayed window. Recorder transport functions. Shortcut function for STOP  REC  PLAY. Recording will be initiated in a single action. If this is executed during recording, the file being recorded will first be closed, and then recording will continue with a new file. Start recording immediately without entering record-ready mode. The specified audio file will be played once from the beginning. Audio files to be played should be saved in the SONGS folder inside the YPE folder. Please note that a file cannot be specified if it is saved in the root directory or in any other folder. When you execute playback, the path in the TITLE LIST screen will move to \YPE\SONGS\. Recall the scene of the next existing number. Recall the scene of the previous existing number. Directly recall the scene of the specified number. Execute RECALL UNDO. Execute STORE UNDO. Select the scene of the next existing number. Select the scene of the previous existing number. Recall the currently-selected scene. Store the current settings. If INPUT or ST IN is selected, switch output bus channels (MIX, MATRIX) to be displayed in the SEND field of the SELECTED CHANNEL VIEW screen. Switches the MIX ON FADER function for the selected MIX on and off. Switches the MATRIX ON FADER function for the selected MATRIX on and off. Switches the MIX ON FADER function on and off. Switches the MATRIX ON FADER function on and off. Switches the SENDS ON FADER function on and off. FUNCTION PARAMETER 1 PARAMETER 2 SET [+48V] SET [Ø] SET [INSERT ON] SET [DIRECT OUT ON] SET [PRE SEND] SET BY SEL SET [TO STEREO] - SET [TO MONO] SET [TO LCR] SET [GAIN COMPENSATION] SET[AUTOMIXER AUTO/MAN] SET DEFAULT VALUE - - SET NOMINAL - VALUE TALKBACK ON - LATCH UNLATCH TALKBACK SELECTED CH ASSIGN - DIRECT ASSIGN *3) CURRENT PAGE - TAP TEMPO EFFECT RACK1-8 - Explanation Hold down this key and press SEL to switch it on/off. During this time, the [SEL] LED will be lit if on or dark if off. If SET [PRE SEND] is selected, "SEND ON FADER" mode is engaged while you are holding down the [SEL] key. While holding down this key, press SELECTED CH or the [TOUCH AND TURN] knob to reset it to the default value. While holding down this key, press a [SEL] key to set the fader of that channel to nominal level. You can also push a knob in the SEND field of the SELECTED CHANNEL VIEW screen to set the send level to nominal level. Switch TALKBACK on/off. Turn TALKBACK on while pressed. While holding down this key, press a SEL key of an OUTPUT channel to switch the assignment on/off. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. The assignment setting made while holding down this key will be stored. Pressing the key again will recall the stored setting. Settings can be stored in multiple keys to facilitate rapid assignment switching. Assign TALKBACK to the channel selected from list 3). Use the tap tempo function in the displayed screen. Use the tap tempo function for the specified effect. *1) QL5: CH1-CH64, QL1: CH1-CH32, ST IN 1L-ST IN 8R, MIX1-MIX16, MTRX1-MTRX8, ST L, ST R, MONO(C) *2) QL5: CH1-CH64, QL1: CH1-CH32, ST IN 1-ST IN 8, MIX1-MIX16, MTRX1-MTRX8, STEREO, MONO(C) *3) MIX1-MIX16, MTRX1-MTRX8, ST L, ST R, MONO(C) *4) QL5: CH1-CH64, QL1: CH1-CH32, ST IN 1-ST IN 8, MIX1-MIX16, MTRX1-MTRX8, STEREO, MONO(C), DCA1-DCA16 *5) QL5: INPUT25/26-31/32, QL1: INPUT9/10-15/16 172 Reference Manual