Yamaha QL1 Reference Manual - Page 91
Using the Cue function, About CUE groups
View all Yamaha QL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
0 Meter field • Meters Indicates the output level of the monitor L/R/C channels. Using the Cue function Monitor and Cue functions About CUE groups Cue signals on the QL series console can be categorized into the following four groups. 1 INPUT CUE group The cue signals of input channels make up this group. To enable cue for this group, press the [CUE] key for any input channel to turn cue on. DANTE1-64*1 OMNI1-16*2 DIGI OUT L/R SLOT1-1-SLOT2-16 *1. QL1: 1-32 *2. QL1: 1-8 Output channels 1-64 to audio network*1 OMNI OUT jacks 1-16*2 DIGITAL OUT jack on the QL unit Output channels 1-16 of an I/O card installed in slots 1-2 NOTE • You can specify output ports only for MONITOR OUT L and R, and monitor through two speakers. • If you have not specified an output port for MONITOR OUT C, selecting the MONO (C) button or LCR button as the monitor source will automatically cause the MONO channel signal to be distributed to MONITOR OUT L/R. A ASSIGN field If you have selected DEFINE in the SOURCE SELECT field, you can use the ASSIGN field to specify multiple monitor sources. The following table shows the monitor sources that you can select in the ASSIGN field. MIX 1-16 MTRX 1-8 STEREO MONO (C) PB OUT INPUT 25-26-31-32*1 *1. QL1: 9-10-15-16 *2. QL1: 9-16 MIX channels 1-16 output signals MATRIX buses 1-8 output signals STEREO L/R channel output signals MONO channel output signal Recorder's PLAYBACK OUT signals INPUT jacks 25-32*2 signals (per two channels) NOTE You can select a maximum of eight monitor sources in the ASSIGN field. If you select eight monitor sources, no further selections will be possible. Turn off the buttons of unneeded sources. Input channel [CUE] key 2 DCA CUE group The cue signals of DCA groups make up this group. To enable cue for this group, press the [CUE] key of one of the DCA groups to turn cue on. DCA group [CUE] key 3 OUTPUT CUE group The cue signals of output channels make up this group. To enable cue for this group, press the [CUE] key of one of the output channels. Output channel [CUE] key MIX/MATRIX channel [CUE] key 91 Reference Manual