Yamaha R-V905 Owner's Manual - Page 16

CONNECTING TO DIGITAL (COAXIAL AND/OR OPTICAL) TERMINALS If your DVD (LD) player, TV/DBS tuner, etc. are equipped with coaxial or optical digital audio signal output terminals, they can be connected to this unit's COAXIAL and/or OPTICAL digital signal input terminals. To make a connection between optical digital audio signal terminals, remove the cover from each terminal, and then connect them by using a commercially available optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. Even if you connect an audio/video unit to the COAXIAL (or OPTICAL) terminal of this unit, you must keep the unit connected with the same named analog audio signal terminals of this unit, because digital signal cannot be recorded by a tape deck or VCR connected to this unit. You can switch the selection of input signals between "digital" and "analog" easily. (See page 29 for details.) DVD or LD player Notes • When connecting an audio/video unit to both of the digital and analog terminals of this unit, make sure to connect to both terminals of the same name. • Be sure to attach the covers when the OPTICAL terminals are not being used, in order to protect the terminals from dust. • The input signal from the DVD/LD input terminals is selected in the following order of priority. (input mode: AUTO position) 1 COAXIAL terminal 2 OPTICAL terminal 3 ANALOG terminal • All digital audio signal input terminals are applicable to the sampling frequency of 32 kHz, 44.1 kHz and 48 kHz. TV/DBS tuner (U.S.A. model) 75Ω UNBAL. EXTERNAL DECODER INPUT MAIN CENTER SURROUND L DIGITAL SIGNAL COAXIAL DVD/LD OPTICAL DVD/LD TV/DBS FM ANT GND AM ANT R GND SUB WOOFER VIDEO SIGNAL LL MONITOR OUT DVD/LD AUDIO SIGNAL TV/DBS IN OUT VCR OUTPUT RR PHONO CD IN OUT (PLAY) (REC) TAPE/MD DVD/LD TV/DBS IN OUT VCR SUB WOOFER 16