Yamaha R-V905 Owner's Manual - Page 41

English ADJUSTING DELAY TIME AND SPEAKER OUTPUT LEVELS When using the digital sound field processor including the Dolby Pro Logic Surround decoder or the Dolby Digital decoder, you can adjust the delay time between the main sound and effect sound, and each speaker's output level as you prefer. 1 2 Adjusting method If you are using the remote control transmitter, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control transmitter. or 2 1 2 Press + or - to adjust the settings for delay time or speaker output levels. Front panel Remote control 1 Press TIME/LEVEL once or more until the name of item which you want to adjust appears on the display. Front panel Remote control or * After pressing TIME/LEVEL once on the remote control transmitter, you can also select the name of item by pressing . When pressed, the selection changes as follows: DELAY Delay time CENTER Center speaker output level R SUR. Right rear speaker output level L SUR. Left rear speaker output level SWFR Subwoofer output level * Pressing on the remote control transmitter changes the selection in the reverse order. * Depending on the mode of this unit, you cannot select all items. or 3 Repeat steps 1 to 3 to adjust settings on any other item. 41