Yamaha R-V905 Owner's Manual - Page 36

SETTING THE SLEEP TIMER If you use the SLEEP timer of this unit, you can make this unit automatically switch to the standby mode. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is useful. The SLEEP timer can be controlled only with the remote control transmitter. Notes • To set the SLEEP timer for this unit, set the SELECTOR DIAL to a position other than the TV postition. To set the SLEEP timer for your TV, set the SELECTOR DIAL to the TV position. • The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel of this unit. 1 To set the SLEEP time 1 Press SLEEP once or more to select the desired SLEEP time. Remote control To cancel the selected SLEEP time Remote control Indicates the SLEEP time. Flashes. Whenever SLEEP is pressed, the SLEEP time will change as follows. (Minutes) 120 90 60 30 Press SLEEP once or more so that "SLEEP OFF" appears on the display. (It will soon disappear and the "SLEEP" indicator will go off from the display.) Note The SLEEP timer setting can also be canceled by tuning this unit into the standby mode with STANDBY/ON on the front panel (or STANDBY on the remote control transmitter) or disconnecting the power plug of this unit from the AC outlet. The SLEEP timer is off (SLEEP OFF). (The state before SLEEP is pressed.) After a while, the "SLEEP" indicator lights up and the display returns to the indication before the SLEEP timer was set. 2 The unit will be switched to the standby mode automati- cally at the selected SLEEP time. 36