Yamaha R-V905 Owner's Manual - Page 19

English, How to connect, For connecting to the MAIN SPEAKERS, terminals, SPEAKERS terminals

Get Yamaha R-V905 PDF manuals and user guides View all Yamaha R-V905 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

English How to connect Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and - markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage this unit and/or speakers. For connecting to the MAIN SPEAKERS terminals For connecting to the REAR and CENTER SPEAKERS terminals Red: positive (+) Black: negative (-) 1 Unscrew the knob. 2 Insert the bare wire. [Remove approx. 5 mm (1/4") insulation from the speaker wires.] 3 Tighten the knob and secure the wire. Red: positive (+) Black: negative (-) 1 Press the tab. 2 Insert the bare wire. [Remove approx. 5 mm (1/4") insulation from the speaker wires.] 3 Release the tab and secure the wire. Banana plug connections are also possible (except for Singapore model). Simply insert the banana plug connector into the corresponding terminal. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
19
English
How to connect
Connect the
SPEAKERS
terminals to your speakers with wire of the proper gauge, cut as short as possible.
If the connections are
faulty, no sound will be heard from the speakers.
Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed.
If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
This could
damage this unit and/or speakers.
For connecting to the MAIN SPEAKERS
terminals
Red: positive (+)
Black: negative (–)
1
Unscrew the knob.
2
Insert the bare wire.
[Remove approx. 5 mm
(1/4”) insulation from the
speaker wires.]
3
Tighten the knob and
secure the wire.
1
Press the tab.
2
Insert the bare wire.
[Remove approx. 5 mm
(1/4”) insulation from
the speaker wires.]
3
Release the tab and
secure the wire.
For connecting to the REAR and CENTER
SPEAKERS terminals
Red: positive (+)
Black: negative (–)
Banana plug connections are also possible (except for
Singapore model).
Simply insert the banana plug connector
into the corresponding terminal.
01RX-V595-e/f2
6/23/99, 4:09 PM
19