Yamaha RX-V2600 Owner's Manual - Page 101

Zone2 Volume (Zone 2 volume) Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks. When Zone2 Amplifier is set to "Internal", this feature is automatically set to "Variable". Choices: Fixed, Variable Zone2 Amplifier Zone3 Amplifier Zone2 Volume Zone3 Volume Zone2 OSD Fixed Variable SYSTEM OPTIONS Zone2 OSD (Zone 2 on-screen display) Use this feature to display the operational status of Zone 2 as well as Zone 3 on the Zone 2 video monitor connected to the ZONE 2 VIDEO jacks on the rear panel of this unit. The Zone 2 and Zone 3 information to be displayed is listed as follows: • The input source of Zone 2 and Zone 3 • The volume level of Zone 2 and Zone 3 • The audio mute status of Zone 2 and Zone 3 • The tonal quality status of Zone 2 and Zone 3 • The XM Satellite Radio information when XM is selected as the input source of Zone 2 and Zone 3 Choices: Off, Zone2, Zone2&Zone3 • Select "Fixed" to fix the ZONE 2 OUTPUT volume level to a standard line level. • Select "Variable" to adjust the ZONE 2 OUTPUT volume simultaneously using VOL +/- on the remote control. Zone3 Volume (Zone 3 volume) Use to select how the volume control will operate with regard to the ZONE 3 OUTPUT jacks. Choices: Fixed, Variable Zone3 Amplifier Zone2 Volume Zone3 Volume Zone2 OSD Fixed Variable • Select "Fixed" to fix the ZONE 3 OUTPUT volume level to a standard line level. • Select "Variable" to adjust the ZONE 3 OUTPUT volume simultaneously using VOL +/- on the remote control. Zone2 Volume Zone3 Volume Zone2 OSD Off Zone2 Zone2&Zone3 • Select "Off" not to display any operational status of Zone 2 and Zone 3 on the Zone 2 video monitor. • Select "Zone2" to display the operational status of Zone 2 only on the Zone 2 video monitor. • Select "Zone2&Zone3" to display the operational status of Zone 2 and Zone 3 on the Zone 2 video monitor. Notes • If Zone2 OSD is set to Zone2&Zone3, changes to the operational status of Zone 3 is displayed on the Zone 2 video monitor. For example, if the input source of Zone 3 is changed while you are watching TV in Zone 2, the name of the changed input source of Zone 3 is displayed on your TV in Zone 2. • If Zone2 OSD is set to Zone2&Zone3, the display contents of Zone 2 and Zone 3 depends on whether or not Zone 2 and Zone 3 are turned on with ZONE 2 ON/OFF and ZONE 3 ON/OFF on the front panel (see page 116). - If both Zone 2 and Zone 3 are turned on, the video signals of the current input source of Zone 2 and the corresponding OSD are displayed on the Zone 2 video monitor. - If Zone 2 is turned off and Zone 3 is turned on, only the corresponding OSD is displayed in the gray background regardless of the REC OUT/ZONE 2 status on the front panel. - If Zone 2 is turned on and Zone 3 is turned off, the video signals of the current input source of Zone 2 and the corresponding OSD are displayed on the Zone 2 video monitor. - If both Zone 2 and Zone 3 are turned off, no video signals and no OSD are displayed on the Zone 2 video monitor. ADVANCED OPERATION 97